Economos Singapore Pte Ltd
Contact - Economos Singapore Pte Ltd
19 Kian Teck Crescent
Singapore 628885
Singapore
Fax
+65 62654788
Legal information - Economos Singapore Pte Ltd
Nature | Head Office |
---|---|
Year established | 1975 |
Describe your Company and attract Business opportunities | |
Co.Registration No | 200505045D |
No employees | 1000-4999 Employees |
Kompass ID? | SG043694 |
Presentation - Economos Singapore Pte Ltd
Due to our unique production process, we are able to manufacture almost every standard-, or special seal within shortest delivery times..
High performance sealing plastic materials
Sealing materials are gaining more and more importance in the sealing technology because of demands on the quality of seal..
ECONOMOS* supplies 22 standard and more than 50 special materials.
STANDARD MATERIALS (POLYURETANES):
ECOPUR® (TPU, green, thermoplastic polyurethane or thermoplastic
- elastomer)
H-ECOPUR® (TPU, red, hydrolysis-resistant thermoplastic polyurethane)
G-ECOPUR® (CPU, red, cast hydrolysis-resitant thermoplasticmaterial
- polyurethane; the same raw material components as H-ECOPUR,
- but used for jointings from 540 to 4000 mm
S-ECOPUR® ( grey, abrasion resistant thermoplastic polyurethane,
- optimumly tribiologic characteristics as friction and wear)
T-ECOPUIR® (TPU, blue, thermoplastic polyurethane
- for deep temperature modified ECOPUR.
X-ECOPUR® (TPU dark green, thermoplastic polyurethane
- with a higher degree of hardness, 57 Shore D)
XH-ECOPUR® (TPU, dark red, hydrolysis resistant thermoplastic
- polyurethane with a higher degree of hardness, 60 Shore D)
XS-ECOPUR® (TPU, dark grey, abrasion resistant thermoplastic
- polyurethane with a higher degree of hardness, 57 Shore D
- and improved sliding properties) the alternative to PTFE solutions.
STANDARD MATERIALS ( ELASTOMERS):
SKF ECORUBBER 1® (NBR, black, elastomer based on sulphur interlaced
- acrylonitrile-butadiene rubber)
SKF ECORUBBER-H® (H-N, black,peroxyd interlaced, hydrogenated acrylonitrile-
- butadiene rubber)
SKF ECORUBBER 2® (FPM,FKM, brown, bisphenol interlaced fluororubber)
SKF ECORUBBER 3® /EPDM, black, peroyd interlaced ethylene-
- propylene-dien rubber)
SKF ECOSI®L (MVQ, reddish brown, peroxyd interlaced silicon rubber)
SKF ECOFLAS® (TFE/P, black, tetrafluorethylene-propylene rubber).
STANDARD MATERIALS (THERMOPLASTICS):
SKF ECOFLON 1® (PTFE-virgin, white, polyetrafluorethylene
- semi-crystalline thermoplastic material)
SKF ECOFLON 2® (PTFE with 15% glass fibres and 5% MoS2, grey,
- polyetrafluoroethylene semi-crystalline thermoplastic material)
SKF ECOFLON 3® (PTFE with fillers, 40% bronze, polyetrafluoroethylene
- semi-crystalline thermoplastic material)
ECOFLON 4® (PTFE with 20% carbon, black, polyetrafluoroethylene
- semi-cristalline thermoplastic material)
ECOTAL® (POM-copo, black, semi-crystalline polyacetal-copolymer)
ECOMID® (PA, black, cast polyamide)
ECOPAEK® (cream coloured, high-performance thermoplastic material)
SKF ECOWEAR 1000® (UHMW-PE, ultra high molecular polyethylene, white.
Molecular weight: 4.500.000 g/mol,white. Excellent wear resistance
and impact strength also at low temperature up to -200°C, semi-crystalline thermoplastic material).
ALTERNATIVE PTFE VARIANTS IN STOCK
ECOFLON Special types (semi-crystallin thermoplastic materials)
PTFE can aside anorganic fillers (see ECOFLON 2 to 4) also be filled
- with organic additives, to produce "high performabce compounds"
Organic fillers are polyphenylensulfones (PPSO2), polyphensulfide
- (PPS), polymides, polyarylate (PAR; "Ekonol") or polyetherether-
- ketones (PEEK)
PTFE matrix can also be modified
- We are using modiefied PTFE/TFM from Dyneon (ECOFLON 5)
Some applications request food compatible PTFE materials.
ECOFLON 1 and 5 fulfill in general the FDA prescriptions
- (Food and Drug Association)
It is shown that various compounds foe diversified appliances
- and requests can be produced
OTHER ALTERNATIVE PLASTICS IN STOCK
VARIOUS RUBBER MATERIALS IN STOCK
polyethylene, white.
Molecular weight: 4.500.000 g/mol,white. Excellent wear resistance
and impact strength also at low temperature up to -200°C, semi-crystalline thermoplastic material).
ALTERNATIVE PTFE VARIANTS IN STOCK
ECOFLON Special types (semi-crystallin thermoplastic materials)
PTFE can aside anorganic fillers (see ECOFLON 2 to 4) also be filled
- with organic additives, to produce "high performabce compounds"
Organic fillers are polyphenylensulfones (PPSO2), polyphensulfide
- (PPS), polymides, polyarylate (PAR; "Ekonol") or polyetherether-
- ketones (PEEK)
PTFE matrix can also be modified
- We are using modiefied PTFE/TFM from Dyneon (ECOFLON 5)
Some applications request food compatible PTFE materials.
ECOFLON 1 and 5 fulfill in general the FDA prescriptions
- (Food and Drug Association)
It is shwon that various compounds foe diversified appliances
- and requests can be produced
OTHER ALTERNATIVE PLASTICS IN STOCK
VARIOUS RUBBER MATERIALS IN STOCK
Engineered plastics products
using sophisticated machining techniques, we can produce both simple and complex components of engineered or advanced engineered plastic parts to either your or our design. Our long lasting experience in materials science helps us to produce the highest standard of seals for our customers, who are looking for the right solution for their specific application problem.
Turn-key systems for producing seals and gaskets
SEAL JET® CNC cutting plants for plastics
WATER JET® cutting plants for plastics
- Our state-of-the-art technology gives us and our partners superiority over our competitors.
- Under the trade names
- SEAL® and WATER JET® we offer proven turnkey
- production systems of latest technology.
Traded Products
We supply a huge variety of trading components and products like o-rings, compact piston seals, radial shaft seals, guide rings, guide tapes, ...
Services
Please continue to use our services like our offer on water cutted gaskets, advanced on-site consulting, product and material development, media resistance tests, finite element analysis (FEA), aso......
High performance sealing plastic materials
Sealing materials are gaining more and more importance in the sealing technology because of demands on the quality of seal..
ECONOMOS* supplies 22 standard and more than 50 special materials.
STANDARD MATERIALS (POLYURETANES):
ECOPUR® (TPU, green, thermoplastic polyurethane or thermoplastic
- elastomer)
H-ECOPUR® (TPU, red, hydrolysis-resistant thermoplastic polyurethane)
G-ECOPUR® (CPU, red, cast hydrolysis-resitant thermoplasticmaterial
- polyurethane; the same raw material components as H-ECOPUR,
- but used for jointings from 540 to 4000 mm
S-ECOPUR® ( grey, abrasion resistant thermoplastic polyurethane,
- optimumly tribiologic characteristics as friction and wear)
T-ECOPUIR® (TPU, blue, thermoplastic polyurethane
- for deep temperature modified ECOPUR.
X-ECOPUR® (TPU dark green, thermoplastic polyurethane
- with a higher degree of hardness, 57 Shore D)
XH-ECOPUR® (TPU, dark red, hydrolysis resistant thermoplastic
- polyurethane with a higher degree of hardness, 60 Shore D)
XS-ECOPUR® (TPU, dark grey, abrasion resistant thermoplastic
- polyurethane with a higher degree of hardness, 57 Shore D
- and improved sliding properties) the alternative to PTFE solutions.
STANDARD MATERIALS ( ELASTOMERS):
SKF ECORUBBER 1® (NBR, black, elastomer based on sulphur interlaced
- acrylonitrile-butadiene rubber)
SKF ECORUBBER-H® (H-N, black,peroxyd interlaced, hydrogenated acrylonitrile-
- butadiene rubber)
SKF ECORUBBER 2® (FPM,FKM, brown, bisphenol interlaced fluororubber)
SKF ECORUBBER 3® /EPDM, black, peroyd interlaced ethylene-
- propylene-dien rubber)
SKF ECOSI®L (MVQ, reddish brown, peroxyd interlaced silicon rubber)
SKF ECOFLAS® (TFE/P, black, tetrafluorethylene-propylene rubber).
STANDARD MATERIALS (THERMOPLASTICS):
SKF ECOFLON 1® (PTFE-virgin, white, polyetrafluorethylene
- semi-crystalline thermoplastic material)
SKF ECOFLON 2® (PTFE with 15% glass fibres and 5% MoS2, grey,
- polyetrafluoroethylene semi-crystalline thermoplastic material)
SKF ECOFLON 3® (PTFE with fillers, 40% bronze, polyetrafluoroethylene
- semi-crystalline thermoplastic material)
ECOFLON 4® (PTFE with 20% carbon, black, polyetrafluoroethylene
- semi-cristalline thermoplastic material)
ECOTAL® (POM-copo, black, semi-crystalline polyacetal-copolymer)
ECOMID® (PA, black, cast polyamide)
ECOPAEK® (cream coloured, high-performance thermoplastic material)
SKF ECOWEAR 1000® (UHMW-PE, ultra high molecular polyethylene, white.
Molecular weight: 4.500.000 g/mol,white. Excellent wear resistance
and impact strength also at low temperature up to -200°C, semi-crystalline thermoplastic material).
ALTERNATIVE PTFE VARIANTS IN STOCK
ECOFLON Special types (semi-crystallin thermoplastic materials)
PTFE can aside anorganic fillers (see ECOFLON 2 to 4) also be filled
- with organic additives, to produce "high performabce compounds"
Organic fillers are polyphenylensulfones (PPSO2), polyphensulfide
- (PPS), polymides, polyarylate (PAR; "Ekonol") or polyetherether-
- ketones (PEEK)
PTFE matrix can also be modified
- We are using modiefied PTFE/TFM from Dyneon (ECOFLON 5)
Some applications request food compatible PTFE materials.
ECOFLON 1 and 5 fulfill in general the FDA prescriptions
- (Food and Drug Association)
It is shown that various compounds foe diversified appliances
- and requests can be produced
OTHER ALTERNATIVE PLASTICS IN STOCK
VARIOUS RUBBER MATERIALS IN STOCK
polyethylene, white.
Molecular weight: 4.500.000 g/mol,white. Excellent wear resistance
and impact strength also at low temperature up to -200°C, semi-crystalline thermoplastic material).
ALTERNATIVE PTFE VARIANTS IN STOCK
ECOFLON Special types (semi-crystallin thermoplastic materials)
PTFE can aside anorganic fillers (see ECOFLON 2 to 4) also be filled
- with organic additives, to produce "high performabce compounds"
Organic fillers are polyphenylensulfones (PPSO2), polyphensulfide
- (PPS), polymides, polyarylate (PAR; "Ekonol") or polyetherether-
- ketones (PEEK)
PTFE matrix can also be modified
- We are using modiefied PTFE/TFM from Dyneon (ECOFLON 5)
Some applications request food compatible PTFE materials.
ECOFLON 1 and 5 fulfill in general the FDA prescriptions
- (Food and Drug Association)
It is shwon that various compounds foe diversified appliances
- and requests can be produced
OTHER ALTERNATIVE PLASTICS IN STOCK
VARIOUS RUBBER MATERIALS IN STOCK
Engineered plastics products
using sophisticated machining techniques, we can produce both simple and complex components of engineered or advanced engineered plastic parts to either your or our design. Our long lasting experience in materials science helps us to produce the highest standard of seals for our customers, who are looking for the right solution for their specific application problem.
Turn-key systems for producing seals and gaskets
SEAL JET® CNC cutting plants for plastics
WATER JET® cutting plants for plastics
- Our state-of-the-art technology gives us and our partners superiority over our competitors.
- Under the trade names
- SEAL® and WATER JET® we offer proven turnkey
- production systems of latest technology.
Traded Products
We supply a huge variety of trading components and products like o-rings, compact piston seals, radial shaft seals, guide rings, guide tapes, ...
Services
Please continue to use our services like our offer on water cutted gaskets, advanced on-site consulting, product and material development, media resistance tests, finite element analysis (FEA), aso......
General Information - Economos Singapore Pte Ltd
Certifications
Type: | ISO 9001 2000 |
---|
Contact people - Economos Singapore Pte Ltd Download the executives list
Participation - Economos Singapore Pte Ltd
Shareholders
For more information, please log inOther Companies recomended by Kompass:

Buy your prospection list
Purchase a Company list with the executives and contact details
Key figures - Economos Singapore Pte Ltd
Activities - Economos Singapore Pte Ltd
Producer
Distributor
Service provider
Activities
- Technical parts, rubber
- Technical parts, rubber, by industry
-
Rings and washers, rubber
- Valves and valve components, rubber
- Diaphragms, rubber
- Packing rings, rubber
- Packings, rubber
- O-rings, rubber
- Rings, rubber, for screw stoppers
- Rings, rubber cord, sealing
- Rings, cellular/foam rubber, sealing
- Rings, rubber, conical, sealing
- Rings, rubber, hexagonal, sealing
- Rings, rubber, flat, sealing
- Rings, rubber, square section, sealing
- Rings, styrene-butadiene rubber (SBR), sealing
- Gaskets, rubber
- Gaskets, elastomer
- Bushes, rubber
- Seals, rubber
- Seals, rubber, high temperature resistant
- Seals, rubber, for bottles and jars
- Seals, rubber, dam and lock gate
- Rings, rubber, to customer specification
- Ebonite products
-
Jointings, packings and gaskets, plastic
- Gaskets, ethylene-propylene-diene monomer (EPDM)
- Gaskets, polyethylene (PE)
- Gaskets, polytetrafluoroethylene (PTFE)
- Gaskets, polytetrafluoroethylene (PTFE) filled
- Gaskets, polyvinyl chloride (PVC)
- Gaskets, plastic, for glazing and draught-proofing
- Packing rings, plastic
- Packing rings, vee type, plastic
- Packings, polytetrafluoroethylene (PTFE)
- Oil seals, plastic or synthetic rubber
- O-rings, polytetrafluoroethylene (PTFE)
- Seals, filled polytetrafluoroethylene (PTFE)
- Jointing materials, plastic
- Plastic products, industrial use
- Plastic products for the food and beverage industry
- Plastic products for laboratories
- Plastic products for the chemical, pharmaceutical and cosmetic industries
-
Plastic products for the mechanical engineering industry
- Bearings, plastic
- Bearings, plastic, oil filled
- Bearings, plastic, graphite filled
- Bearings, plastic, anti-friction, ozone and acid resistant
- Bearings, polyurethane (PU) tyred
- Washers, plastic
- Bushes, plastic, for mechanical engineering
- Flanges, plastic
- Compensators, plastic
- Wear strip for conveyors, plastic
- Plastic products for the mechanical engineering industry to customer specification
- Plastic products for the electrical and electronics industries
- Plastic products for the electrical and electronics industries
- Plastic products for measuring apparatus
- Seals and gaskets, metal
- Packings, metal
- Carbon based products
- Internal combustion engine components NES
- Pump components and accessories
- Metal shearing and cutting machines, chipless. Guillotines
- Rubber processing machinery and equipment
- Plastic moulding equipment and machinery
- Machining equipment for plastics
- Stone cutting equipment and machinery
- Machinery and equipment for ceramic products
- Metal cutting services
- Rubber machining services
- Plastic processing services
-
Machining contractors for plastic
- Plastic machining services, manual
- Boring services for plastic
- Turning services for plastic
- Milling services for plastic
- Routing services, computer numerically controlled (CNC) for plastics
- Deflashing and finishing services for plastic parts
- Cutting services, water jet, for plastic
- Cutting services, laser, for plastic
- Machining services for polytetrafluoroethylene (PTFE)