Product
Service platforms for horizontal machine tools
The lifting equipment (service platform) is intended for horizontal and vertical rebuilding of workspace for crew at machine tool. Horizontal movement is solved by hydraulic gearing with soft start /run out. The cabin protects the crew against flying chips and coolant. The lifting equipment is assembled by special stand with the guide rails direct to the machine. Service platforms (lifting equipment) for horizontal machine tools is produce by company TRATEC - CS, Ltd., Velký Šenov, Czech Republic.
More info: http://www.tratec.cz/en/manufacturing/service-platforms-and-machine-covering/service-platforms-for-machining-centres/
Price of the Product
Category of the Product
Company website
2
products -
TRATEC - CS, s.r.o.
Our recommended products and services
-
-
Protective enclosure made up of 60x60 posts with a welded base and panels with a 20x20 or 30x30 frame assembled together using a Satech patented quick-release CLIP. This range is used in so-called heavy conditions, such as industrial robotics or the steel industry.REDUCED ASSEMBLY TIME -25% compared to traditional systemsPanels Frame: 20 x 20 Frame Heavy version: 30 x 30 Mesh size: 22 x 100 x 3 mm (distance to danger zone: 120mm) Width from 200 to 1500 in 100 mm increments Posts Dimensions: 60 x 60 x 2 Heights: 1120 - 1420 - 1660 - 2060 - 2260 - 2640 Legs: welded with 4/6 fixing points to the ground.
-
Protective enclosure made up of 60x60 posts with a welded base and panels with a 20x20 or 30x30 frame assembled together using a Satech patented quick-release CLIP. This range is used in so-called heavy conditions, such as industrial robotics or the steel industry.REDUCED ASSEMBLY TIME -25% compared to traditional systemsPanels Frame: 20 x 20 Frame Heavy version: 30 x 30 Mesh size: 22 x 100 x 3 mm (distance to danger zone: 120mm) Width from 200 to 1500 in 100 mm increments Posts Dimensions: 60 x 60 x 2 Heights: 1120 - 1420 - 1660 - 2060 - 2260 - 2640 Legs: welded with 4/6 fixing points to the ground.
-
Rod leaving the clamping head More space to work – let the rods out! In particular applications, it can be necessary that the rod leaves the clamping head, e.g. for reasons of accessibility or restrictions regarding space that do not allow a rod that is permanently in place. Especially in applications where moulds are closed and kept closed against high forces with the SITEMA PowerStroke, it is a big advantage when the rod can leave the clamping head. Thus, the rods are no obstacle when taking finished parts out of the mould or when handling parts.
-
